DUCAN Dek-Master Joint Filler & Patching Compound - 8 lb

The Dek-Master Decking Cement Filler can be used as a joint crack, hole filler, and leveler, and is to be used on new plywood surfaces under Dek-Master® vinyls. This is a modified cement-based compound for filling and leveling T & G plywood joints, screw holes, transition between wood and flashing or cant strip. A Spread rate of 264 sq ft per gallon or 8 sheets of plywood.

• High-performance, rapid-setting, cement-based skim-coating compound for the finishing and smoothing of dry rough textured concrete and approved wood underlayments
• Use to fill knot holes, plywood seams and deck screw indentations or nail holes
• For use with dek-master vinyl
• Easy to apply and rapid-setting compound - Can be used indoors or outdoors
• May also be used as a floor skim leveling compound for minor inconsistencies in wood or rough textured concrete
• To be used with dek-master vinyl sheeting
• Colour: grey concrete powder
• Do not use at temperatures below 50°F (10°C) or above100°F (38°C) - Note: water temperature should not exceed 73°F (23°C) (higher water temperature will shorten pot life)
• Dry touch time: 30 minutes
• Cure time: 30 minutes
• Clean up: use water to clean tools before material dries