FlexRock Wall and Ceiling Texture

The Newest Surface Coating from BeautiTone!

Wall 1

On this wall, we used Dream Lace - Low Profile finish. Base Coat: FRWC-035. Top Texture: FRWC-035 (60% strength). This colour combination creates an appealing finish with subtle contrast and depth.

1. Roll down a thin, uniform base coat of FRWC-035 (same manner as paint). Allow it to dry 30 minutes. Use a standard 10mm paint roller or the HardRock Stone Texture roller.
2. Load the FlexRock/HardRock Texture roller with FRWC (60%) so that the protruding leather pieces as well as the roller felt are saturated with material. Use a second empty paint tray to remove majority of product from the roller. This will ensure a very controlled, light texture application without unintended "blobbing".
3. Begin with very light pressure in an "X" pattern. After a few strokes, any remaining excess product will be deposited onto the wall.
4. Roll freely in random directions to create the blend of colour and texture that suits your taste. Flatten texture with a plastic smoother where desired. Repeat until the wall is completed.

...........................................................................................................................................................................................................................................

Wall 2

On this wall, we used a Natural Suede finish, colour FRWC-036.

1. Roll thinly onto the wall in the same manner as paint.
2. Apply product with a standard 10mm paint roller. For slightly more texture interest, use the HardRock Stone Texture roller.
3. Roll out product for a flat, lightly textured finish. Avoid heavy looping (unless this is desired).

Friendly advice: Before doing the FRWC application, practice on a spare piece of drywall or other surface. When you are happy with the look, duplicate it on the actual wall surface.